Fender FM25 DSP Mode D'emploi page 6

6
6
Your new FM25 DSP amplifier delivers world–class
Fender ® tone and world–standard Fender
technology:
• 25 Watts into 8 ohms
• Digital Signal Processing
• 15 Effects "FX" settings
• 16 Amplifier "TYPE" settings
• 1 Classic Fender ®
Channel 1
A. INPUTS - Plug your guitar in here.
B. CHANNEL SELECT - Press to switch between
channels (see Footswitch {L}):
CH 1
CH 2
C. CHANNEL LED - Indicates the active channel:
CH 1
CH 2
D. CH1 VOLUME - Adjusts the loudness of Channel 1.
E. GAIN - Adjusts distortion level of Channel 2 (except
when Acoustic is the selected Amp Type {G}).
F. CH2 VOLUME - Use to adjust the loudness of
Channel 2 after you have set the Gain {E} level.
G. AMP TYPE - Selects the core amplifier circuitry of
Channel 2 (see next page).
H. TREBLE/MIDDLE/BASS - Adjusts the tone in the
high/mid/low frequency bands respectively.
I. FX SELECT - Selects the active effect (see next page).
J. AUX IN - Input jacks for connecting your MP3/CD
player or drum machine. Use the volume control on the
external device to adjust the loudness of this input.
The Auxiliary input accepts "RCA" type plugs.
All manuals and user guides at all-guides.com
®
clean tone (Channel 1)
Channel 2
"
f f e e n n d
F M M F M 2 2 M 2 5 5 2 5 D D 5 D D S S S S P P P P
F F
• 2 Channels—independent settings and sounds
DSP
• Push-button or Footswitch channel switching
• Headphones jack—for silent practice
• Auxiliary Input—connect your MP3/CD player or drum
machine for accompaniment
Thank you for choosing Fender
Thank you for choosing Fender
—T one, T radition and Innovation—since 1946
—T one, T radition and Innovation—since 1946
F e e F e e a a a t t a t u u t u u r r r r e e e s s e s s
F F
K. HEADPHONES - Output jack for connecting
headphones. This jack can also be used as a line
output to mixer or other equipment. The FM25 DSP
speaker is disabled when this jack is used.
/
standard 1/4" mono or stereo plug.
L. FOOTSWITCH - Connect a 1-button Fender
footswitch (optional) to enable remote channel
selection. NOTE: Connecting a footswitch will disable
the front panel Channel Select button.
M. POWER LED - Indicates when the amplifier is ON.
N. POWER SWITCH - Switches the
amplifier ON–OFF.
O. POWER CORD SOCKET - Connect the
included power cord in accordance with
the voltage and frequency ratings
specified on the rear panel of your
amplifier.
d e e r r . . c c o o m m
®
®
The Headphones jack accepts a
Rear Panel
"
®