Publicité
3 SOFTWARE INSTALLATION
USB Driver
The USB Driver is installed automatically when power is applied the fi rst time. CLS-E NG Yoke
must show up in your Windows Device Manager as Game Controller «CLSE NG Yoke»
(standalone mode). Optionally assign functions to Button 2, 3 and Coolie Hat. Button 4 and 5
is mapped to "Trim". Button 1 is mapped to "Trim Reset" in standalone mode as default
IN CASE THAT CLS2SIM IS USED, THE USB X-AXIS (ROLL) AND Y-AXIS
(PITCH) MAPPING FOR THE CLS-E NG YOKE MUST BE DISABLED IN
YOUR SIMULATION SOFTWARE.
DUAL YOKE SETUP / SYNCHRONIZATION
In case of using 2 CLS-E NG Yokes (MCC Confi guration), connect a standard
RJ45 Cat5 Ethernet cable on the "CANopen" connector between the units.
All necessary settings for self-synchronization are done automatically at
the fi rst power up of the 2 devices.
Read the manual and help fi le in CLS2Sim for additional information.
In case of trouble or questions, please contact us at
info@brunner-innovation.swiss
All manuals and user guides at all-guides.com
CLS2SIM (v4.9 or later)
For enabling additional Control Loading Features
download CLS2Sim (Win32 application) from
https://www.brunner-innovation.swiss/media
If the optional CLS2Sim Soft ware is installed all
axis are mapped by the soft ware automatically.
5
Publicité
