Control Elements And Connections - Carson Gyro CG-1 Mode D'emploi

• Always leave the remote control (transmitter) turned on, as
long as the model is in operation.
Always switch your model off fi rst, before switching off the
remote control sender.
• In case of a fault or a malfunction, correct the fault fi rst then
re-start the model.
• Do not expose your model, the gyro and the remote control to
direct sunlight or excessive heat for longer periods of time.

5. Control elements and connections

1 Receiver connection for the tail servo
2 Receiver connection for
the tail servo controller for
gyro sensitivity
3 Connection plug for the
tail servo
4 Set-LED
5 Potentiometer for gyro
sensivity (GAIN)
6 Switching the servo
rotation direction
3
4
CARSON Gyro 507027
5
1
GB
6
2
9