bort medical StabiloGen Sport mit Haftband Mode D'emploi page 9

– do not use in case of intolerance of one of the materials used
– no re-use. This medical aid is intended for treating one patient only
– whilst wearing the support, please neither use any creams nor ointments on or
around it as they can destroy the material
Fitting instructions
1
Fold the grip top outwards, grasp the upper edge of the support.
2
Then pull it over your foot up to the knee with the pad facing forwards.
3
The pad should be placed comfortably over the kneecap. Then, flap the grip
top back towards the leg so that the silicone nodules are directly on the skin.
Removal
4
To remove the support, please fold the grip top outwards, grasp the lower edge
of the support at the side on the splints and pull it downwards over the foot.
Fitting instructions
Grasp the upper edge of the support and pull it over your foot up to the knee with
the pad facing forwards. The pad should be placed comfortably over the kneecap.
Removal
To remove the support, please grasp the lower edge at the side on the splints and
pull it downwards over the foot.
Material composition
Polyamide (PA), elastane (EL), silicone (SI)
The sewn in textile label provides the precise material composition.
EN
09