Danfoss EvoFlat 4.0 Guide D'installation page 13

Installation Guide
7. MAINTENANCE
The flat station requires little monitoring, apart from routine checks. It is recommended to
read the energy meter at regular intervals, and to write down the meter readings.
Regular inspections of the flat station according to this Instruction are recommended, which
should include:
Strainers
Cleaning of strainers.
Meters
Checking of all operating parameters such as meter readings.
Temperatures
Checking of all temperatures, such as HS supply temperature and PWH temperature.
Connections
Checking all connections for leakages.
Safety valves (for the circulation)
The operation of the safety valves should be checked by turning the valve head in the
indicated direction.
Venting
Checking that the system is thoroughly vented.
Inspections should be carried out minimum every two years.
Spare parts can be ordered from Danfoss.
Please ensure that any enquiry includes the flat station serial number.
© Danfoss | DCS-SGDPT | 2022.01
EvoFlat 4.0 Flat Stations for apartments, single- and multi-family houses
Authorized personnel only
Assembly, start-up and maintenance work
must be performed by qualified and authorized
personnel only.
AN40274706699301-010101 | 13
EN