EDIFIER TWS6 Mode D'emploi page 5

Power ON/OFF
●
•
Power on automatically when taken out from the charging case;
•
Power off automatically while placed in the charging case.
Bluetooth Connection
●
•
Open the charging case, then press and hold the pairing button to
enter pairing state, the LED light flashes rapidly;
•
Set mobile phone to search for and connect to either "EDIFIER TWS6 L"
or "EDIFIER TWS6 R", after pairing is successful, the LED light flashes
slowly.
•
You can choose to use one earbud or both earbuds.
TWS Pairing of the Left and Right Earbuds
●
The left and right earbuds have finished TWS pairing before leaving
factory. If the wireless connection fails to resume, please follow the
steps below to re-pair:
•
Place the earbuds in the charging case, then press and hold the pairing
button for 8 seconds to enter TWS pairing state, the LED light flashes
rapidly;
•
After pairing is done, blue lights of both earbuds flash slowly.