Interroll MSC 50 Mode D'emploi page 18

Safety-related information
2.3 Dangers
Here, you will find information about the different types of dangers or damage that can occur in connection
EN
with the operation of the MSC 50.
Injury to persons
Installation work must be carried out by authorised technical personnel in compliance with the applicable
¾
provisions.
Rotating parts
Keep fingers and hair away from moving parts.
¾
Persons with long hair should wear a hair net.
¾
Close-fitting work clothing should be worn.
¾
Do not wear items of jewellery such as necklaces or bracelets.
¾
2.4 Interface to other devices
The integration of the MSC 50 into a conveyor system can create additional potential hazards. Such potential
hazards are not covered by this instruction manual and must be analysed during the development, installation and
commissioning of the conveyor system as a whole.
Following the integration of the MSC 50 into a conveyor system, the entire system must be checked for any
¾
new potential hazards that may be present before the conveyor is switched on.
18 von 18 Version 1.0 (03/2023) Online