Interroll MSC 50 Mode D'emploi page 17

2 Safety-related information
2.1 Proper use
The MSC 50 magnetic speed controller is suitable for cycle operation in gravity roller conveyors, in terminals for
sorters, as well as in spiral conveyors. It slows down cardboard boxes and plastic containers weighing 0.5 kg to 35 kg.
The number of speed controllers to be used depends on the type of material to be conveyed and the type and incline
of the conveyor module.
The MSC 50 may only be used in an industrial environment for industrial purposes within the stipulated performance
limits that are given in the technical data.
It must be integrated into a conveyor unit or conveyor system before commissioning.
The MSC 50 is not a safety component and must not be used to protect persons.
Misuse may lead to serious injuries.
2.2 Improper use
Any use that goes beyond the proper use is considered improper, unless this has been authorised by Interroll
Engineering GmbH where applicable.
The MSC 50 is not suitable for continuous operation.
Any modification of the MSC 50 by conversion or attachment to the MSC 50 is prohibited.
The equipment must not be installed in areas in which substances could form explosive atmospheres/dust atmospheres
or for application in the medical/pharmaceutical sector.
It is considered improper use to install the equipment in exposed spaces that are open to potentially adverse weather
conditions, or areas in which the technology would suffer from the prevailing climactic conditions and could potentially
malfunction as a result.
The MSC 50 is not intended for use by private end users.
The MSC 50 is not suitable for transporting people.
Do not use the MSC 50 to drive other conveyor rollers.
Version 1.0 (03/2023) Online
Safety-related information
EN
17 von 18