Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Measuring AC or DC Currents
Set the selector switch to the ammeter function A.
Open the jaws of the alligator clip with the spring catch and insert it on the
conductor where the measurement is to be made.
Release the spring catch and make sure the jaws are in good contact to reclose the
magnetic circuit correctly.
Range switching and AC/DC selection are automatic.
In DC, the residual or zero current may be corrected by pressing and holding the
button.
HOLD
In DC current, the maximum current is 400 A.
In A DC, the display indicates :
In A AC, the display indicates :
Display Range
Measurement
0,20 - 39,99 A 40,0 - 399,9 A 400 - 600 A peak
Range
Precision
1,5% ± 10 points 1,5% ± 2 points 1,5% ± 2 points
Resolution
Measuring Temperature
Without probe
The displayed temperature measurement is that of the tester,
equivalent to the ambient temperature after thermal stabilization.
The T° INT symbols appear on the display.
___
OL
___ below - 399,9 A
OL
above 600 A peak.
OL
A
10 mA
0,1 A
(Ammeter)
above + 399,9 A
A
A
1 A
19
Publicité
