Publicité
Les langues disponibles
Les langues disponibles
Screen Burn Protection
„
Configures the Screen Burn Protection options to prevent and reduce pixel burn.
When an image remains in one position too long, it may cause a permanent burn on the screen.
Preventing Screen Burn-in
To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you
to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot).
The Time setting allows you to program the time between movement of the picture in minutes.
•
Pixel Shift
: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to prevent after-
images on the screen.
Optimum condition for pixel shift;
N
Horizontal
Vertical
Time(min.)
•
Side Gray
: When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white
balance on both extreme left and right sides. To prevent the screen burn from happening, select Dark or Light.
-
Dark
: When you set the screen ratio to 4:3, it darkens the left and right sides.
-
Light
: When you set the screen ratio to 4:3, it brightens the left and right sides.
Reducing the Effects of Screen Burn
If screen burn has occurred, you can select scrolling to help remove screen burn artifacts.
•
Scrolling
: This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern.
Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image
on the screen for a long time.
The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-
N
images on the screen. If the after-image is not removed after performing the function, repeat the function again.
Press any key on the remote control to cancel this feature.
N
PictureReset→ResetPictureMode/Cancel
❑
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.
N
BN68-02426A_Eng.indb 24
All manuals and user guides at all-guides.com
Item
TV/AV/Component/HDMI
0~4
0~4
1~4 min.
2 min.
English - 24
2
2
Advanced Settings
Picture Options
Picture Reset
►
2009-09-10
2:58:30
Publicité
