Samsung PN42B400P3D Mode D'emploi page 15

Operation
Turning the TV On and Off
Press the POWER button on the remote control. You can also use the POWER button
on the TV.
It may take a while for your TV to power on.
N
Changing Channels
Using the Channel Buttons
❑
Press the CH or CH
When you press the
N
sequence. You will see all the channels that the TV has memorized. (The TV must
have memorized at least three channels). You will not see channels that were either
erased or not memorized. See page 19 to memorize channels.
Using the Number Buttons
❑
Press the number buttons to go directly to a channel. For example, to select channel "27",
press "2", then "7".
For quick channel change, press the number buttons, then press the
N
button.
Using the " " Button
❑
The " " button is used to select stations that broadcast a digital signal.
1. For example, for Channel "7-1", press "7", then "
HD indicates the TV is receiving a Digital High Definition signal.
N
SD indicates the TV is receiving a Standard Definition signal.
For quick channel change, press the number buttons, then press the
N
button.
Using the PRE-CH Button to select the Previous Channel
❑
1. Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then
N
use the number button to select the second channel. Then use the PRE-CH button to
quickly alternate between them.
Adjusting the Volume
Using the Volume Buttons
❑
1. Press the VOL
Using the MUTE Button
❑
At any time, you can cut off the sound using the
1. Press MUTE button and the sound cuts off.
The will displayed on the screen.
2. To turn mute off, press the
VOL button.
BN68-02426A_Eng.indb 15
All manuals and user guides at all-guides.com
button to change channels.
CH or CH button, the TV changes channels in
", then "1".
or VOL button to increase or decrease the volume.
MUTE button.
MUTE button again, or simply press the VOL
English - 15
ENTERE
ENTERE
or
2009-09-10 2:58:22