Christopeit Sport ET6 Instructions De Montage Et D'utilisation page 19

COMPUTER
DISPLAY
[TIME] time: 00:00~99:59.
[RPM] revolutions per minute: 0~15~999
(Alternates with SPEED every 6 seconds.)
[SPEED] speed in Km/h: 0.0~99.9 km/h
(Alternates with RPM every 6 seconds.)
[WATT] watt: 0-999 Watt
(Alternates with LEVEL every 6 seconds.)
[LEVEL] resistance level: 1~24 level
(Alternates with WATT every 6 seconds.)
[CALORIES] calories in Kcal: 0~999kcal
[DISTANCE] distance in Km: 0.00~99.99 km
(ODO-KM Total: The distance in km of all training units is
displayed.)
[PULSE] pulse: P~40~240, max value is available.
(Heart symbol ashes on/o i pulse data transmit.)
Program: MANUAL, PROGRAM (P1-P12), WATT, USER,
H.R.C, FAT
U0-U4 User: Selection of the user (U0-U1-U2-U3-U4) with
deault values [♀ / ♂ ] gender, [AGE] age, [HEIGHT] height and
[WEIGHT] weight.
Start display:
1. Code for speed programming
2. Bluetooth identication number or APP operation
3.KM Total (ODO)
KEYS
[T-TEST] key: Fitness test by measuring your recovery rate.
(F1-6)
[E-ENTER] key: Function select and conrmation key.
[R-RESET] key: Press to return to select program. Reset the
computer by 3 sek.press.
[+] - [-] keys: Increases or decrease value or select option.
(Only ashing inormation can be changed/ conrmed.)
Pressing the [+] and [-] keys simultaneously for 2 seconds will
reset the ODO display and restart the computer.
[START/STOP] key: Starts or stops/ interrupts program.
OPERATION
Use
1. Connect the power adapter to the product and a properly
wired outlet. The display inside the computer will illuminate
accompanied by a beep and briey show a speed programming
code, bluetooth identication number and ODO. Then appears
the user number (U0-U4). By pressing the [E] button you can
choose between the deault values [♀ / ♂] gender, [AGE] age,
[HEIGHT] height and [WEIGHT] weight. You can change the
values with the [+/-] keys and conrm with the [E] key. Ater the
specication, the values are saved. At the next training session,
the user data can simply be conrmed with the [E] key to get
to the program selection or the manual program can be started
directly by pressing the [START/STOP] key.
2. Use the [+/-] keys to select a program category: MANUAL,
PROGRAM, WATT, USER, H.R.C., FAT and conrm by pressing
the [E] key. The default values such as time, distance, calories
and pulse can be called up in the selected program using the [E]
button and changed using the [+/-] buttons. If you set one of the
default values time, distance, calories, it will be counted down to
0.
3. When the program and the default values are set, press the
[START/STOP] key to start training.
4. Pressing the [START/STOP] key again ends or interrupts
the program. All values reached up to that point are save until
the device switched o and you can continue training based on
these values or you can set all functions to zero using the [R]
key.
5. The computer switches o automatically approx. 3 minutes
after the end of the training.
19
GB