Degometal GO251 Manuel page 33

All manuals and user guides at all-guides.com
3.2.3 Charger Safety Instructions
- Make sure that the charger and its power
connection equipment are not damaged;
- Always use the genuine power connection
equipment of this tool;
- Never use the charger in a humid or wet
environment, or close to inflammable substances
or gases. Failure to comply with this instruction
might cause explosion.
4. Maintenance and Service
4.1 Maintenance
The maintenance of the tool is limited to the complete jaw
assembly:
- Remove the battery;
- Unscrew the nose piece and front sleeve;
- Unscrew the clamping sleeve, take out 3-jaw set;
- Take out the push pin set and push pin spring;
- Unscrew the spring sleeve set;
- Clean and lubricate the parts or replace them if
worn;
- Re-assemble in reverse order ensuring that all
parts are tightened.
31