FALK F Serie Guide Rapide page 39

Selected functions of the Falk Navigator
Route options
1. Select the Route options button on the main menu.
2. You can set the means of transport which you are currently using: Car, Motorcycle, Bicycle or Pedestrian
Then tap on Next.
3. You should now select the criterion for route optimisation Route optimised – shortest route to your destination /
Quickest – route with the shortest travelling time / Economical – route with optimum time and distance
Then tap on Next.
4. Stipulate whether certain means of transport should be excluded. (Motorways, Ferries, Toll roads)
Route planner
You can use the route planner to simulate routes before you set off.
1. Tap on the Route planner button on the main menu.
2. The route planner has a similar structure to the address entry function. You first enter a starting point, and you then
define a finish point for your route. (Cf. Using the keypad)
3. Then tap on Calculate.
4. Tap on Simulation to simulate the route which is to be travelled.
5. Tapping on the map will take you back to the main menu and there you can cancel the simulation on page 3
(by clicking on the blue arrow at the bottom right-hand corner of the screen).
Tours
You can compile tours with several stop-off points.
1. Tap on the Tours button on the main menu.
2. Tap on New tour to create a new tour.
3. Enter a name via the keypad and tap Use.
4. Tap on the + button in order to create stops in the tour.
For example, you can add an Address.
5. Tap on Calculate to run through the tour you have created.
Delete route
If you are currently navigating but wish to stop navigating before you have reached your destination, you should select
the Delete route button on the main menu. You will switch to the position-tracking mode. You can also delete a simu-
lated route in the route planner via this option.
All manuals and user guides at all-guides.com
EN
35