Connecting The Ac Adaptor - Roland BA-330 Mode D'emploi

When using the AC adaptor

Connecting the AC adaptor

* You must use the included AC adaptor. Using any other AC adaptor may cause malfunction or fire.
3.
Connect the AC adaptor to the
[DC IN] jack.
Insert it until you hear it click into place.
1.
Make sure that the [POWER]
switch is turned off.
2.
Connect the included power
cord to the included AC adaptor.
Power cord (included)
AC adaptor
(included)
AC outlet
4.
Connect the power cord to an
AC outlet.
Steps to Take Before Powering Up