Publicité
Les langues disponibles
Les langues disponibles
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the
serial number plate correspond to your domestic power supply.
Voltage can vary by ±6% of the rated voltage.
For operation with different voltages, a suitably sized auto-transformer must
be used.
The appliance must be earthed.
The power supply cable plug is provided with a contact for this purpose.
If the domestic power supply socket is not earthed. connect the appliance to
a separate earth in compliance with current regulations, consulting a
specialist technician.
The Manufacturer declines all responsibility if the above safety
precautions are not observed.
This appliance complies with the following E.E.C. Directives:
- 87/308 EEC of 2/6/87 relative to radio interference suppression.
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications.
- 89/336 EEC of 3.5.89
(Electromagnetic Compatibility Directive) and subsequent modifications.
36
Important
Publicité
