Member's Mark 720-0830G Mode D'emploi page 9

d. Tighten the two 5/32 screws
removed from step a. Loosen the one
5/32 screw at the front of the side
burner bowl (C) then align the side
burner igniter wire (L) to the hole and
tighten the screw.
e. Install the sear burner grease tray (K)
from the rear of the grill. Push control knob
(F) onto valve control stem. See Fig.5
All manuals and user guides at all-guides.com
F
Fig.4
Fig.5
9
C
L
K