Publicité
Les langues disponibles
Les langues disponibles
Assembly Instruction
All manuals and user guides at all-guides.com
Tighten all screws on the grill as some screws may have loosened during transit
1.Sear Side Burner Assembly
Fig.1
(a). Loosen but do not remove (A2) two screws
A2
which are pre-assembly on the right side panel.
(b).Remove the (A1) three ¼" screws on the top
edge of the side burner bowl, align the bottom key
holes on side burner bowl with two loosened (A2)
screws on right side panel. Hang the side burner
bowl to the cart with the two loosened screws on
the side panel.
A1
(c) Insert the (A3) 5/32" screw and 1 M4 flat
washer to attach the sear side burner shelf control
panel to the main control panel. Fully tighten the
two loosened screws to secure shelf to firebox.
See Fig.1
2. Searing Side Burner Valve Assembly
A3
a. Remove the two screws from the searing side burner,
then remove the searing side burner. See Fig.2
Fig.2
b) Loosen but do not remove the two M4
screws that are pre-attached to the valve.
Fig.3
Insert the searing side burner valve into the
searing side burner control panel and bezel.
Align the screws on the valve with the large
side of the holes on the bezel. Slide the
screws down to the smaller holes and
tighten the screws to secure.
c) Replace the searing side burner, angling
it so that the side burner tube slides over the
valve orifice. See Fig.3
8
Publicité
