Member's Mark 720-0830G Mode D'emploi page 15

Note: Remove all packaging, including straps, before using the grill
OFF OFF
IGNITE / HI IGNITE / HI
LO LO
Main Burners
OFF
2
IGNITE / HI
1
3
LO
2
IGNITE / ON
1
All manuals and user guides at all-guides.com
OFF OFF
IGNITE / HI IGNITE / HI
LO LO
1
2
3
4
OFF
IGNITE / HI
Lo
OFF
IGNITE / HI
LO
Sear Burner
Make sure the lid is open.
Push and turn the control knob to "IGNITE/HIGH", at the
same time, press and hold electronic ignition button to
light the burner. Once the burner is lit, release the
electronic ignition button and knob.
If burner does not light within 5 seconds, turn the knob
to OFF and repeat the lighting instruction.
If burner does not light up after step 3, turn the knob to
OFF, wait 5 minutes, and repeat the lighting procedure
or light by match.
Match light
1. If the burner will not light after several
attempts then the burner can be match lit,
before using the match allow 5 minutes for
any accumulated gas to dissipate.
2. Clip a paper match on one end of the
lighting rod.
3. Light match.
4. Hold lighting rod and insert lighted match
right next to the burner ports or ceramic file.
5. Push and turn the designated control knob
to IGNITE/HIGH.
6. Burner should ignite immediately.
15
Lighting Instructions