Ryobi R18RT-0 Traduction Des Instructions Originales page 6

expansion when the accessory gets hot.
BALANCING ACCESSORIES
For precision work, it is important that all accessories
be properly balanced. To balance an accessory, slightly
loosen the collet nut and give the accessory or collet a 1/4
turn. You should be able to tell by the sound and feel if
the accessory is running in balance. Continue adjusting
in this fashion until the best balance is achieved. Replace
accessories if they become damaged or unbalanced.
LEARNING TO USE THE ROTARY TOOL
Hold the pen in your hand and get used to its weight,
balance, and the taper of the housing. This taper permits
the pen to be grasped like a pencil.
MAINTENANCE
WARNING
The product should never be connected to a power supply
when you are assembling parts, making adjustments,
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product will prevent
accidental starting that could cause serious injury.
WARNING
When servicing, use only original manufacturer's
replacement parts, accessories and attachments. Use of
any other parts may create a hazard or cause product
damage.
■ Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
WARNING
Do not at any time let brake fl uids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. They contain chemicals that can
damage, weaken or destroy plastic.
WARNING
For greater safety and reliability, all repairs should be
performed by an authorised service centre.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for environment-
friendly recycling.
SYMBOLS ON THE PRODUCT
Safety alert
CE conformity
4 | English
No-load speed
Rated speed
V Volts
Direct current
EurAsian Conformity Mark
Please read the instructions carefully
before starting the machine.
Ukrainian mark of conformity
Failure to keep long hair away from air
inlet could result in personal injury.
Wear eye protection
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or retailer
for recycling advice.
SYMBOLS IN THIS MANUAL
Note
Parts or accessories sold separately
The following signal words and meanings are intended to
explain the levels of risk associated with this product:
DANGER
Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION
(Without Safety Alert Symbol) Indicates a situation that
may result in property damage.