Dri-Eaz DrizAir 1200 Manuel Du Propriétaire page 11

Owner's Manual
ERROR
MESSAGE
ER 1, 2, 3, 5, 6
ER 4
ER 8
ER 9
1.7 At the End of the Job
As with all dehumidifiers, once the drying job is completed, it is important to make
sure the unit is completely purged of water before moving it. To ensure that all
water has drained into the pump, turn the unit off, allow it to rest for 10
minutes, then press the PURGE button. (The unit must be plugged in for the purge
to operate.) Once the purge cycle is complete, unplug the unit and remove it promptly
from the job.
Before transporting, be sure to remove the external drain hose, drain it carefully, and
return it to the pocket provided on the front of the unit.
1.8 Transporting and Storage
NOTICE: Handle the unit carefully. Do not drop, throw, or place the unit where it could
fall. Rough treatment can damage this equipment and may create a hazardous
condition or void warranty.
NOTICE: Handle the unit carefully. Do not drop, throw, or place the unit where it could
fall. Rough treatment can damage this equipment and may create a hazardous
condition or void warranty.
DrizAir 1200 Owner's Manual108998K
EXPLANATION
Problem with electronic control panel. Contact Dri-Eaz Service.
Check the temperature or sensor cable. Contact Dri-Eaz
Service for instructions.
Check the touchpad key. Press and release each key several
Check for obstructions or kinks in the drain hose.
times.
© 2023 Legend Brands, Inc.
11