OHAUS MB90 Guide De Démarrage Rapide page 2

MB90/MB120
Edit default method
The analyzer comes with a default method preinstalled. The settings of the default method are shown on the display.
To edit the settings, press on the area where the settings are displayed.
MB90 Moisture Analyzer interface
MB90/120 Moisture Analyzers Quick Start Guide
Drying and measurement
You are now able to follow the progress of the drying cycle on the display. This
first display comes up automatically when the test was started.
Observing the test progress
There are five displays available when the Moisture Analyzer is running a test.
(Showing %MC, %DC, g, %RG or a curve. )
When pressing the data area while %MC is shown, the display will cycle
through each of the five displays.
The display indicates the Method Name, Temperature/Time, actual
temperature, elapsed time duration of the test, moisture and curve.
The test automatically stops at the end of the measurement.
If you want to end the test sooner, press the
Congratulations! You have just performed your first measurement with your
moisture analyzer.
Carefully remove the sample pan handle from the drying area.
WARNING: As the pan and sample may still be hot,
you should let these cool down before removing
the pan from the pan handle!
MB120 Moisture Analyzer interface
Press the setting items to edit them.
Please see the instruction manual for more details.
ii
Quick Start Guide
button.
MB120 moisture analyzer features
SmartGuide TM function. It can
automatically generate suitable
test method for your samples.
To use it, Click
on the top right corner of the
interface.