Partyspace Airspace Zodiac 5x5m Mode D'emploi page 12

5. Attach the roof to the ends of the legs of the f rame using the snap connectors.
6. Ensure that the tent is completely open and that the legs of the f rame are not twisted.
7. Connect the pump, preferably to the valve below the pressure gauge. This means you can
see the pressure the entire time you are pumping it up.
8. Pump the f rame fully to a pressure of 3.6 psi. The battery pump switches off automatically
as soon as the set pressure is reached. The electric pump has to be switched off manually.
9. (Optional) Attach the side walls.
5.
7.
9.
Full
sidewall
AIRSPACE - MANUAL
12
Window Panoramic
sidewall window wall
6.
8.
Door wall
(vertical zipper)
EN
Roll up
door wall