Replacing The Wings - WowWee FlyTech Skyhopper Guide D'utilisation

repl a cin g t h e win gs
If the wings on your Skyhopper become damaged, you might need to replace them .
A spare set of wings is included in the Skyhopper package .
NOTE: When replacing the wings, adult supervision is required
To replace the wings, do the following:
1 . Remove the first pair of wings by pulling the wing rods out from the sockets as
illustrated . Then pull the first pair of wings off the hook at the end of the body .
Repeat for the second pair of wings, if necessary .
2 . To install the new wings, hook the rear part of the first pair of wings onto the
hook at the end of the body . Then, slide the wing rods into the sockets, as
illustrated . Push until you can see the rods through the window in the sockets .
Repeat for the second pair of wings, if necessary .
eNGlIsH
13