Publicité
Les langues disponibles
Les langues disponibles
CLEANING
1. Turn gas shut-off valve OFF before cleaning.
2. Allow burner to cool completely before cleaning.
3. Remove grate(s) and drip tray by lifting from cabinet.
4. Note position of front and rear burner assemblies in cabinet. Remove burner assemblies.
5. Clean food particles from grate drip tray with warm water, mild detergent and a bristle brush. Rinse with
clean water. Wipe dry with a soft clean cloth.
6. Examine burner assemblies. Note position of air shutters before cleaning. Clean food particles from
burners with warm water, mild detergent and a bristle brush. Rinse by wiping with a soft cloth
dampened with clean water. Wipe exterior surfaces dry with a soft clean cloth. Allow burners to air dry
so that interior passages are completely free of water.
7. Wipe the outer portions of the burner cabinet with a clean soft cloth or sponge dampened with warm
water and a mild detergent or cleaner formulated for cleaning stainless steel. DO NOT use steel wool to
clean burner cabinet. Rinse by wiping burner cabinet with a clean soft cloth or sponge moistened with
clean warm water. Dry cabinet by wiping with a clean soft dry cloth.
8. Examine burners to be sure the air shutters are in their proper position.
9. Reinstall burner assemblies in cabinet:
•
Burner with short venture tube is the front burner. The venture / air shutter slides over the
nozzle of the right control valve. The pegs on the bottom of the burner set in corresponding
notches at the front of the burner support bracket.
•
Burner with long venture tube is the rear burner. The venture / air shutter slides over the nozzle
of the left control valve. The pegs on the bottom of the burner set in corresponding notches at
the rear of the burner support bracket.
10. Turn shut-off valve ON and light pilot light.
11. Reinstall drip tray and grate. Procedure is complete.
All manuals and user guides at all-guides.com
19
Publicité
