NGS ROLLER BYRON 360 Mode D'emploi page 4

All manuals and user guides at all-guides.com
ENGLISH
CHARGING THE BLUETOOTH
SPEAKER
1. Connect the Bluetooth speaker's micro USB socket with
the computer's USB port through USB cable.
2. The red LEDs will flash to indicate that the rechargeable
battery is being charged.
3. The red LEDs will stop flashing when the rechargeable
battery is fully charged.
4. Disconnect the USB cable, and close the rubber seal
cover when it is done.
BLUETOOTH SPEAKER PAIRING /
RECONNECTING
1. Press the ON/OFF a button for 3 seconds. The mode LED
will blinking in blue; the device is turned ON and goes
into searching / paring / reconnect mode for pair.
2. Now, turn ON the Bluetooth function on your mobile
phone.
3. Search for "NGS ROLLER BYRON 360 " and select it
to pair (for first time pairing or pairing a new mobile
device).
4. The Bluetooth speaker will be reconnecting
automatically if your mobile phone has been
paired (Depend on the of mobile phone's type and
configuration, manual reconnection may require on
some devices).
5. If pairing is successful, a message sound; "beep" will
announce from speaker and the mode LED light will
keep turn on.
3