Hoover NEXTRA HNF 9167 Manuel D'instructions page 25

All manuals and user guides at all-guides.com
40002080Eng.qxd 05/11/2004
Fast Iron (
This option is only available on the Synthetics, Acrylics, Woolmark and Silk
programmes.
Programme Fast Iron function
Synthetics The programme is
( 50) completed by a short
spin, of very low speed.
Acrylics The machine stops in the
( 40) final rinse stage and the
option indicators blink.
The load is held in the
water in the drum, thus
reducing creasing and
enabling easier ironing.
Woolmark The machine stops in the
( ) final rinse stage and the
option indicators blink.
The load is held in the
water in the drum, thus
reducing creasing and
enabling easier ironing.
Silk The machine stops in the
( ) final rinse stage and the
option indicators blink.
The load is held in the
water in the drum, thus
reducing creasing and
enabling easier ironing.
Start Delay (
The Programme Set End Time/Start Delay options can be used if you want the
washing to be ready at a later time (but within 24 hours). The way these
buttons function will depend on which Time Mode you have selected in the
Inter@ct menu.
18:43 Page 25
)
Action required to complete the
cycle
To select a full spin cycle please
turn the dial to the required spin
programme (see Programme
Guide).
Press the -
with the programme. The
machine will then pump out the
water and the programme will
conclude with a short spin.
Finally, the programme carries
out a brief tumbling action to
loosen the items in the load.
Press the
machine will pump out the
water and complete the cycle
with a short spin.
Press the
machine will pump out the
water to complete the cycle. The
load will not be spun and will
therefore be very wet.
)
button to continue
button and the
button and the
25