Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
40002080Eng.qxd
05/11/2004
18:43
Page 19
You can select which option you require by pressing the
button until your
preferred option is displayed, and then pressing the
button to accept the
option you have chosen.
Both options are very useful, but Absolute Time Mode is easier to use since
there is no need for you to calculate how many hours to leave before you
want the machine to end or start your chosen cycle.
When you have entered your preferred Time Mode the display will then ask
for Enable Final Beeping to be set.
SET FINAL BEEP (default setting – JA)
Here you have the option to have a beeping alarm to let you know the wash
cycle has finished. By pressing the
button you can scroll through the YES
(JA) and NO (NEE) options.
To confirm your selection press the
button. The screen will then move to
the next stage and ask you if you wish to Enable Memory.
ENABLE MEMORY? (default setting – NEE)
This is a useful feature if you frequently wash laundry using the same
programme. Selecting ENABLE MEMORY? will tell the machine to remember
the last programme/functions used and set them in the memory. This feature
works only on the Cottons, Delicates, Synthetics and Woollens programmes.
The memory does not retain settings within the Special Programmes group.
Select JA or NEE by using the
button and confirm your selection by
pressing the
button.
SET DEMO MODE? (default setting – NEE)
The display will now show a message asking if you require the demo mode to
be set. Please set this option to NEE if this has not already been done. This
function is for SERVICE use only. If the demo mode option is set to JA, the
wash programme WILL NOT commence when you exit the Inter@ct 3D menu.
The Demo Mode must be set to NEE for the wash cycle to commence. Select
NEE using the
button and confirm your choice with the
button. You
will then be asked if you wish to Exit the Menu.
EXIT MENU?
If you are happy with the settings you have selected, you can now exit the
menu by selecting JA via the
button and confirm this selection using the
button. However, if you are not happy with some of the settings selected
you must select NEE and you can then start programming again from the
beginning. By pressing the
button you can enter and bypass each option
individually until you reach the option you would like to change.
When you are completely satisfied with the menu options you have selected,
you may exit the menu. Testing of the installation may now start. If you wish
to change any of the menu settings at a later date, you can enter the menu as
19
Publicité
