Publicité
Les langues disponibles
Les langues disponibles
9
Check that air conditioner is titled back about 1/4" to 1/2" (tilted about 2° to 4° downward to the outside, see
FIG. 12A & FIG. 12B). After proper installation, condensate should not drain from the overflow drain hole during
normal use, correct the slope otherwise.
FIG. 12A
H
N I
S
D I
E
H
about
Wooden Window
10
In order to minimize air leaks between the room air conditioner
and the window opening, suitable weather stripping(trim the
provided weather stripping into suitable size) should be applied
in case of any gaps found at the location as indicated by the
arrows in Fig. 13.
Removing the air conditioner From Window
Turn the air conditioner off, and disconnect power cord.
Remove sash seal from between windows, and unscrew sash lock.
Remove screws installed through frame and framelock.
Remove the insulation panel and close (slide) side panels into frame.
Keeping a firm grip on air conditioner, raise sash and
carefully remove.
Be careful not to spill any condensate water while lifting
unit from window. Store parts WITH air conditioner.
O
U
T
S
D I
E
Bottom Rail
FIG. 12B
H
INSIDE
H1
Vinyl-Clad Window
Weather stripping
Installation
OUTSIDE
Bottom Rail
FIG. 13
5
Publicité
