Publicité
Les langues disponibles
Les langues disponibles
-
the freezer is properly levelled on the floor and does not vibrate when the compressor is
in operation: adjust the feet provided as appropriate;
-
The drawers and shelves are correctly fitted and securely in place: fit correctly;
Troubleshooting Guide
The appliance is not working.
Check that
•
the switch in your home installation fuse box is switched on.
•
the wall socket is working. This can be done by connecting another electrical device to
the socket and checking for function.
The unit seems to generate insufficient cooling power.
Check whether
•
too much food has been stored in the unit.
•
the thermostat is set to position 'MIN' (in this case, set it to a suitable higher value).
•
the door is not properly closed.
•
there is too much dust on the condenser.
•
the unit is too close to a wall or other object at the rear or to the sides.
The normal operating sound changes or becomes louder.
Check whether
•
the unit has been properly positioned.
•
any objects or obstructions are touching the rear of the unit.
•
there are any objects on top of the unit which might be vibrating.
Door Reverse
This freezer has been built with the door hinges on the right. If you want to change the opening
direction, please follow the instruction below.
WARNING: When reversing the door, the appliance must not be connected to the mains.
Remove the plug from the mains beforehand.
1. Remove the hole cover. (Fig. 1)
2. Remove hinge cover and top hinge with a "+" screwdriver, then remove the door. (Fig.2)
3. Remove the foot and bottom hinge, fix them to opposite side. (Fig.3)
4. Put on the door to bottom hinge, then fix top hinge and cover. (Fig.4)
5. Fix the hole cover, completed. (Fig.5)
7
English
Publicité
