Zycoo SL50 Guide D'installation Rapide page 3

Installation
1
Use an 8mm drill to drill 4 holes on the mounting wall as per the dimensions shown in
Figure 1. The size of plastic anchor is ø8*40mm.
2
Insert a plastic anchor into each of the mounting holes and use a rubber hammer to
tighten the installation of the anchors.
3
Install the mounting bracket to the mounting holes using the M5*45 screws, as shown in
Figure 2.
65mm
Figure 1
3
Put the device down, unscrew the back cover of the column speaker, remove the 4G mod-
ule to expose the SIM card slot on the main board, push the buckle down (Picture 1) and
lift it up (Picture 2), install the SIM card inside the SIM card slot on the mainboard, close
the buckle and push it up (picture 3).
1
English
wall
Figure 2
wall