BGS technic 3155 Mode D'emploi page 7

COMPONENTS
Brake venting hose
When venting, this side has to be connected to the
pump.
Brake venting fitting
For venting brakes. Fits all current air valves.
Oil pipe
Connects extraction hose and pump. Therefore,
carefully plug this fitting into the pump's adaptor
and twist it, until it is locked securely.
6.7 mm extraction hose
Pushed through the dipstick for drawing-off oil.
4.5 mm extraction hose
Pushed through the dipstick for drawing-off oil.
Compressed-air valve
Needs to be sealed when using the manual
vacuum pump. Valve is depicted open.
Collet for extraction and venting hoses.
See oil pipe and brake venting hose.
Clamp valve
Pushed onto the venting hose. Needs to be sealed
to create a vacuum in the pump.
Guide wire
To stabilizes the oil suction tube during insertion
into the oil dipstick tube.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed