BGS technic 3155 Mode D'emploi page 5

Oil Extraction and Brake Vent Pump
GENERAL
This compressed-air supported tool is designed to extract oil from all current vehicle types via the oil
dipstick. By doing so, you do not need a car hoist to perform an oil change. For certain vehicle types
this tool is indispensable, because these vehicles are delivered without an oil bleed screw. Another
benefit of this tool is its built-in manual vacuum pump which allows venting brakes without
compressed-air. Just create a vacuum in the tools tank and vent the brakes as usual in a second
step. Compressed-air supported venting of brakes is also possible, of course.
NOTES
Always wear fuel- and oil-resistant gloves when working with brake fluids.
•
• Drawn off brake fluid has to be disposed properly and cannot be used again.
When using this pump for its various purposes (drawing off oil, venting brakes), assure that there
•
are no residual fluids in the pump's tank which will lead to a mixing of those fluids and a much
more difficult disposal.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 3155
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed