Frigidaire GALLERY Serie Instructions D'installation page 10

30" ELECTRIC FRONT CONTROL FREESTANDING INSTALLATION INSTRUCTIONS
7. Install filler trim kit
Note: Installation of the filler trim kit is not required.
Disconnect electrical power to range before
beginning installation. Before servicing any part of the
appliance, make sure the appliance is off and the surfaces
are cool. Attempting to service the appliance while hot may
cause burns or other injury.
Filler Trim Attachment Instructions:
1. Remove the 7 screws on the vent trim on the back.
2. Place the filler trim over the back by lining up the 7
screw holes of the filler trim with the vent trim and
tighten screws.
3. When filler trim is secured it will be flush with the top of
the range.
Fig. 16
Fig. 17
Fig. 18
Fig. 19 - Range with filler trim installed.
7