Publicité
Les langues disponibles
Les langues disponibles
Related information
Use HDMI&CEC
on page 19
Connecting Speakers or Other Audio Receivers
To connect speakers or other audio receivers with an audio cable (not provided), see the illustration below.
Ensure the audio connected devices are switched on before switching on the TV.
When a digital audio system is connected to the DIGITAL AUDIO OUT port, decrease the TV volume, and use
your digital audio system to control the volume.
Note:
•
If you prefer to use Audio Return Channel/Enhanced Audio Return Channel, please refer to
External Devices > Connecting a Digital Audio System with ARC
You can connect the DIGITAL AUDIO OUT port on the back of the TV to the optical port on the amplifier.
•
Then go to
> Settings > Display & Sound > Audio Output > Digital Audio Out to select Dolby
Audio - Dolby Digital to receive the Dolby Digital audio.
Related information
Select Speakers
on page 34
Connecting a Digital Audio System with ARC
If you would like to use the Audio Return Channel (ARC) feature to send sound from the TV by a HDMI cable
to a digital sound system, you can connect it to the HDMI (ARC) port of your TV.
By using this feature, you can also control the sound system with your TV remote instead of using the remotes
for each device.
After the connection:
1. Power on the sound system.
2. Press
button on your remote control to select Settings > Display & Sound > Audio Output > Audio
Output > ARC
Note:
•
Audio receiver must support ARC function.
Connecting to External Devices
in this manual.
25
Connecting to
Publicité
