(d) + , - : adjust room temperature .Temperature setting from 10-49℃. Press "
increase the desired temperature and "
When the room temperature lower 4 ℃ than the settled temperature of unit, it's high
power working, lower 2℃, Lower power working, if room temperature reach the setting
temperature, the heating stop, fan is permanently on till room temperature lower than
the setting temperature 2℃, the unit automatically return to lower power heating, if
room temperature lower 4 ℃, higher power heating, it's automatically return to heating.
(e) Swing : Press
(f) Press
to turn off the heater, the unit will keep working 30 seconds of cool air after
turn off it . this design can protect item use longer.
Warning:
1.Before removing the plug from the socket, switching off and better work for 30-60
second for cool down in condition that protecting inner parts.
2. Remote control Install lithium battery, battery model No. CR2025
OVERHEAT PROTECTION
This heater is protected with an overheat protection that switches off the appliance
automatically in case of overheat, e.g. due to the total or partial obstruction of the grids.
In this case, unplug the appliance, wait about 30 minutes for it to cool and remove the
object which is obstructing the grids. Then switch it back on as described above. The
appliance should operate normally. Should the problem persist, please contact the
nearest customer service.
NOTE: To assist in maintaining the internal components, after pressing the OFF button
the fan will continue to blow room air for a period of 30-60 seconds before shutting down
to standby.
to activate swing. Press it again to cancel.
" to decrease the desired temperature.
3
" to