Wellell Optima Auto Link Mode D'emploi page 11

Optima Auto Link / English
3. Installation
3.1. Pump & Mattress
NOTE: Unpack the box to inspect for any damage which may have occurred during shipment.
If there are any damages, please contact your dealer immediately.
(1). Place the mattress on top of bed frame and foot print toward foot end. Secure the mattress firmly by
fixing the straps to bed frame to ensure mattress will be free from sliding. Securing straps are located
on the base of the mattress
NOTE: Make sure that ALL the Relief knobs and emergency CPR knob are closed and locked in
position.
CAUTION: Placing another layer of sheet or bed linen between the patient and the mattress
may reduce the benefits provided by the mattress and should be avoided at all time.
(2). Hang the pump onto bed panel at the foot-end and adjust hangers to hang the pump to best upright
position, or place the pump on a flat surface.
(3). Connect the air hose connector of air mattress and the electrical cord of position sensor to the pump
unit. Make sure the air hose connection is completed and secured when a "click" sound is felt or heard
and position sensor assemble the alignment with the arrow pointing up.
NOTE: Check and ensure the air hose is not kinked or tucked under mattress.
NOTE: Auto recognition mattress of Optima Auto.
(1)
(4)
(2)
(5)
8
(3)
(6)