Kohler Components K-77990-8-CP Guide D'installation Et D'entretien page 8

Screw
5. Connect the Valves
Tighten the mounting hardware to secure each valve body to the
deck or rim.
Connect the hot and cold valve bodies to the hot and cold water
supply lines.
Connect the hot and cold supply lines to the hot and cold faucet
valves.
CAUTION: Risk of product damage. Do not expose the internal
spout components to excessive soldering heat. Wrap a wet rag
around the supply tube before soldering the connections.
Wrap a wet rag around the spout supply tube to protect the
internal spout components from soldering heat.
Solder the connections.
1317801-2-A
Hot
8
Cold
Solder
Kohler Co.