Conrad 75 16 91 Mode D'emploi page 55

All manuals and user guides at all-guides.com
12.1 Setting the Time and Date (Sub-Menu: DATE/TIME)
With the menu item "SET DATE/TIME",
you can set the time and date. This is
important for later image evaluation
and time-controlled recording mode.
Select the menu item and press the
"Enter" button (4). The sub-menu
"DATE/TIME" opens.
Use the up and down "navigation but-
tons" (16) to select the desired option
or value.
Use the + and - "navigation buttons" (16) to change the value.
DATE FORMAT = setting the date format:
SET DATE = setting the date and
SET TIME = setting the time
Press "Stop/Exit" (2) button to close the current setup menu.
12.2 Setting the Motion Detection
The menu item "SET MOTION DETECT" lets you set the sensitivity for motion detection
(SET MD SENSITIVITY). Here you can set the motion detection sensitivity for a recor-
ding to start. This makes sense to prevent accidental recording due to shaking leaves,
etc. You can also set the range where motion is to be monitored (SET MD AREA).
46
Year/month/date (Y/M/D)
Month/day/year (M/D/Y)
Day/month/year (D/M/Y)