Publicité
Les langues disponibles
Les langues disponibles
EXTENSION CORDS
Use proper extension cords. Make sure your
extension cord is in good condition and is a 3-wire extension
cord which has a 3-prong grounding type plug and matching
receptacle which will accept the machine's plug. When using
an extension cord, be sure to use one heavy enough to carry
the current of the machine. An undersized cord will cause a
drop in line voltage, resulting in loss of power and overheating.
Fig. D shows the correct gauge to use depending on the cord
length. If in doubt, use the next heavier gauge. The smaller the
gauge number, the heavier the cord.
FOREWORD
Porter-Cable Model 3700L is a high capacity, 10" compound laser miter saw designed to cut wood and non-ferrous metals. This unit
incorporates the latest technology TwinLaser™ line-of-cut indicator feature. It can crosscut 5-1/2" x 2-3/8" and 3-1/2" x 3-1/16", miter
at 45° right, 3-3/8" x 3-1/16", miter at 45° left, 2-5/8" x 3-7/16", bevel at 45° left, 5-1/2" x 1-9/16" and 3-5/8" x 1-7/8", and compound
45° x 45°, 3-15/16" x 1-9/16" and 2-7/16" x 2-13/64". It has positive miter stops at 0°, 15°, 22.5°, 31.62°, and 45° both left and right,
and bevel stops at 0° and 45° left.
NOTICE: The photo on the manual cover illustrates the current production model. All other illustrations contained in the manual are
representative only and may not depict the actual color, labeling, or accessories, and are intended to illustrate technique only.
1
1.
Miter Saw
2.
Dust bag
3.
Fence slide
4.
Clamp
5.
Fence slide support
6.
Extension table
7.
3mm hex wrench
All manuals and user guides at all-guides.com
FUNCTIONAL DESCRIPTION
CARTON CONTENTS
2
3
7
6
MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere
Rating
Volts
0-6
120
0-6
120
0-6
120
0-6
120
6-10
120
6-10
120
6-10
120
6-10
120
10-12
120
10-12
120
10-12
120
10-12
120
12-16
120
12-16
120
12-16
120
4
8
5
10
9
8.
1/8" Hex Wrench
9.
5mm Hex Wrench
10. Arbor and Fence Wrench
11. Fence Clamping Screw
12. M8 x 1.25 x 30 Hex Head Screw
13. M8 x 1.25 x 20 Hex Head Screw
14. M6 x 1.0 x 16 Set Screw
7
Total Length
Gauge of
of Cord in Feet
Extension Cord
up to 25
18 AWG
25-50
16 AWG
50-100
16 AWG
100-150
14 AWG
up to 25
18 AWG
25-50
16 AWG
50-100
14 AWG
100-150
12 AWG
up to 25
16 AWG
25-50
16 AWG
50-100
14 AWG
100-150
12 AWG
up to 25
14 AWG
25-50
12 AWG
GREATER THAN 50 FEET NOT RECOMMENDED
Fig. D
12
13
11
14
Publicité
