Zyxel NWA570N Guide De Démarrage Rapide page 6

2 Click on Properties..
3 Select Internet Protocol (TCP/IP) (A). Then click
on Properties (B)
Make a note of your original IP address
settings. You will need to reset your IP
address back to these settings after you
have finished the Wizard.
4 Type 192.168.1.x as the IP address, where x is a
number between 3-254. Avoid IP addresses taken
by other devices on your network, such as
192.168.1.2, which is the NWA570N's default IP
address.
5 Type 255.255.255.0 as the Subnet mask. Click
OK.
ENGLISH
6
A
B