NZR ZMZ 0205 Manuel page 13

3. Special features ZMZ 0205
All manuals and user guides at all-guides.com
3.1 Coin register (Option „A")
When ordering „Option A" a mechanical 5-digit non-resetable roller counter is mounted
on the cover for registration of all inserted coins. This option is retrofittable by factory
easily.
4. Short manual ZMZ 0215
4.1 Settings
For all settings the four buttons on side-cut-out of terminal cover are used. Press button
„Betrieb" before and after every change of settings. „Außer Betrieb" is displayed after
first pushing the button. „Reset" follwed by version number of software is displayed after
pushing the button in normal operation. All changeable values can be displayed by multi-
ple pushing of button „Menü".
Depending on version the following information are displayed:
„Zeit" (time)
„Münzen" (coins)
optional „Nachlauf" (lag)
optional „Vorlauf" (advance) (start delay)
optional „ext. Start"
optional „ext. Stop"
4.2 Setting of running time
Within the menu „Zeit" the cursor (underscore) can be scrolled to the position by multip-
le pushing the button „Auswahl".
Push the button „Ändern" to set the value of basic time in HH : MM : SS.
Push the button „Betrieb" to return to operation mode or „Menü" for next setting.
4.3 Number of coins
Calling up the menu „Münzen" set the number of coins needed to start the device by
pushing the „Ändern" button. Refer to 4.2 for further settings.
NZR – Ihr Partner für Energiemessung
(running time)
(number of coins)
(lag of 2 relay)
nd
(start with external button)
(stop with external button)
11