Publicité
Les langues disponibles
Les langues disponibles
After use
1. Open the water tank cap and pour
out the water.
2. Turn on the power switch and drain
out the water.
• Operate until no more water appears
and then turn off the power switch.
3. Stand the main unit in the charger.
4. While pressing the nozzle release
button, remove the nozzle from the
main unit and place it on the nozzle
stand.
Cleaning
1. Pull out the water tank downwards.
All manuals and user guides at all-guides.com
2. Clean with water.
3. Wipe away the water with a towel etc. and dry.
4. Align and slide the water tank along the groove
Use a cloth to wipe away the stains on the charger.
• Never use thinners, benzine, or alcohol since it
may cause malfunction or cracking/discoloration
of the parts.
• Do not clean the charger with water.
• About once every six months wipe the prongs
of the power plug with a dry cloth.
• Remove the identification ring and clean with water.
• Do not wash with hot water exceeding 50 °C.
• If using a detergent, use one suitable for dishwashing.
Rinse well with water to ensure no detergent remains after cleaning.
• Wipe away moisture with a towel and leave to dry in a well-
ventilated area.
Scrub the filter at the tip of the
suction hose lightly with a soft brush.
and install it securely.
13
Publicité
