Charging
► On the bathroom countertop or a shelf
1. Place the cord in the right, left or centre
cord guide, depending on where the charger
will be placed.
2. Place the charger on a secure, level surface.
3. Plug in the power plug.
1
1
Insert main unit so it stands
upright in the charging section.
The charging indicator will light up.
• Be sure to place the main unit upright. If
the main unit is tilted or not in direct contact
with the charger, the main unit may not
charge properly.
• Charging is completed in about 15 hours.
• The lamp does not go off even when
charging ends.
• The main unit will provide an operation time
of approximately 15 minutes of use when
the battery is fully charged. (The operating
duration will become shorter as the
batteries get older.)
2
2
Disconnect the power plug after charging is
completed.
• The battery performance will not be affected even if it is
charged for more than 15 hours.
10
All manuals and user guides at all-guides.com
Notes
• When using the appliance for the first time or if it has not been
used for more than half a year, the charging indicator may not
light up for several minutes after charging starts or the
operating time may become shorter. In such cases, charge the
battery for 23 hours or more.
• Recommended ambient temperature for charging is 0 – 35 °C.
Battery performance may decrease outside of the recommended
temperature.
How to use
1
1
2
2
3
3
Attach the nozzle firmly onto the
main unit.
Open the water tank cap, hold the
main unit so it is level, and fill the
tank with water.
• Always use new tap water or lukewarm water.
• If the water feels cold, use lukewarm water
with a temperature of 40 °C or less.
Close the water tank cap, making
sure it locks in place.