Publicité
Les langues disponibles
Les langues disponibles
Features
A
PS/2 Port: Use this port to connect a Tripp Lite ENVIROSENSE environmental
sensor to provide remote temperature/humidity monitoring and a dry contact
interface to control and monitor alarm, security and telecom devices. Contact Tripp
Lite Customer Support at (773) 869-1234 for ordering information. Note: Do not
connect a keyboard or mouse to this port.
B
Mini-DIN Serial Port: Use this port to provide a direct terminal connection to a
computer with a terminal emulation program. A serial cable (part number
73-1025) is included with the SNMPWEBCARD. If you need to order a replacement
cable, contact Tripp Lite Customer Support at (773) 869-1234.
C
Ethernet Port: Use this RJ-45 jack to connect the SNMPWEBCARD to the network
with a standard Ethernet patch cable. The Link LED
several operating conditions, as shown in the table below. Not compatible with PoE
(Power Over Ethernet) applications.
SNMPWEBCARD Operating Conditions
C1
Link LED Color
Off
Flashing Amber
Flashing Green
C2
Status LED Color
Off
Steady Green
Flashing Amber
All manuals and user guides at all-guides.com
A
B
C1
and Status LED
C
C1
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
Card Not Initialized
Card Initialized and Operational
Error - Card Not Initialized
8
C2
indicate
C2
Publicité
