Annovi Reverberi AR 903 Notice D'utilisation Et Installation page 23

GENERAL INFORMATION 1
After-Sales service procedures
To request after-sales service (in the event of a pump malfunction or failure, etc.) contact your nearest service
centre or the manufacturer.
When requesting after-sales services, always state the pump's data plate data and the type of problem.
Disclaimer
The manufacturer accepts no liability arising from:
- incorrect installation;
- improper use of the pump;
- failure to service the pump;
- unauthorised modifications and/or repairs;
- use of non-original spare parts, or parts not specifically intended for the model.
Annexed documentation
The following documentation is issued to the Customer together with this manual:
- declaration of incorporation
Glossary
Installer: authorised technician having the prerequisites and the specific skills required for the tasks involved
in the installation of the pump and/or similar machinery and for the performance of the routine maintenance
operations in conditions of safety, independently and without risk.
Operator: authorised person having the prerequisites, skills and information needed for use of the pump or
the machine or plant on which the pump is installed, and for routine maintenance procedures.
Purchaser: individual, organisation or company which has purchased the pump and intends to use it for the
intended purposes.
Repairs: all operations performed to conserve the pump's efficiency and operating characteristics. These pro-
cedures, required in the event of an unexpected malfunction, must only be carried out by a skilled technician.
The information for the use of skilled repair technicians only is provided in the "Repairs Manual".
Routine maintenance: all operations required to keep the pump in good working order, to ensure a longer
working life and maintain compliance with safety requirements. The manufacturer describes the maintenance
procedures and intervals in this "Use and Installation Manual".
Training: a phase necessary to transfer to the operators the knowledge needed for the correct, risk-free per-
formance of operations.
i
Information
There may be differences between the illustrations and the pump's actual conformation,
but any such differences will not affect the clarity of the instructions. If in doubt, request
the necessary explanations from the manufacturer.
English language Use and Installation
23