Publicité
Les langues disponibles
Les langues disponibles
3. Place the end of the workpiece against the
end stop (5) and commence the cut.
Transportation (Fig. F)
Make sure the extension arms have been put into
to the most compact position (refer to 'Adjusting
The Extension Arms'). Now fold the stand as
described in 'Folding the stand'. Use the carrying
handle (8) placed in the centre of the frame (9).
5. MAINTENANCE
The mitre saw stand is designed to
function faultlessly for a long period and
with a minimum of maintenance. Extend
its lifespan by regularly cleaning the
machine and treating it correctly.
Cleaning
Regularly clean the mitre saw stand, preferably
after each use. Clean with a suitable proprietary
house- hold cleaner and a soft dry cloth. Do not
submerge your mitre saw stand in water or any
liquid for any reason. Do not use solvents (petrol,
alcohol, ammonia, etc.) as they will damage the
plastic parts.
Maintenance
Never use a damaged or broken clamping mitre
saw stand. Temporary repairs are not permitted.
Check the plastic feet of the mitre saw stand
before and after use of the mitre saw stand. Do
not use the mitre saw stand without the plastic
feet or when the plastic feet are worn. Always
maintain a visual control of the mitre saw stand
before and after use of the mitre saw stand.
Repairs and maintenance shall be carried out by
a competent person with suitable replacement
parts. Unapproved third party spares are not
recommended and will void your warranty.
WARRANTY
FERM products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for
the period lawfully stipulated starting from the
8
date of original purchase. Should the product
develop any failure during this period due to
defective material and/or workmanship then
contact your FERM dealer directly.
The following circumstances are excluded from
this guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers.
• Normal wear and tear.
• The tool has been abused, misused or
improperly maintained.
• Non-original spare parts have been used
This constitutes the sole warranty made by
company either expressed or implied. There are
no other warranties expressed or implied which
extend beyond the face hereof, herein, including
the implied warranties of merchantability and
fitness for a particular purpose. In no event
shall FERM be liable for any incidental or
consequential damages. The dealers remedies
shall be limited to repair or replacement of
nonconforming units or parts.
The product and the user manual are subject
to change. Specifications can be changed
without further notice.
Publicité
