Publicité
Les langues disponibles
Les langues disponibles
UNIVERSAL MITRE SAW STAND
MSA1030
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings,
the additional safety warnings and the
instructions. Failure to follow the safety
warnings and the instructions may result in
electric shock, fire and/or serious injury. Save the
safety warnings and the instructions for future
reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non observance of the instructions in
this manual.
Use the mitre saw stand on flat and
level ground.
Support long workpieces, for
example with another workbench.
Do not stand on top or use as ladder.
Maximum permissible
load 150 kg. Do not
exceed the maximum
permissible load.
SPECIFIC SAFETY INSTRUCTIONS
FOR SAW STANDS
• Pull the plug from the mains receptacle and/or
remove the battery from the power tool before
making adjustments on the tool or changing
tool accessories. Unintentional switching on of
the power tool is the cause of many accidents.
• Assemble the saw stand in the proper manner
before mounting the power tool. Proper
assembly is important to prevent the risk of a
collapse of the saw stand.
• Attach the power tool securely to the saw stand
before using it. Slipping off of the power tool on
the saw stand can lead to loss of control.
• Place the saw stand on a firm, level and
horizontal surface. If the saw stand can slip off
or wobbles, the power tool or the workpiece
cannot be uniformly and securely guided.
• Do not overload the saw stand and do not
use it as a ladder or scaffolding. Overloading
or standing on the saw stand can lead to the
upward shifting of the centre of gravity of the
stand and its tipping over.
• When working or transporting, take care that
all bolts and connecting elements are firmly
tightened. The attachment sets for the power
tool must always be firmly locked. Loose
connections can lead to instability and inexact
sawing.
• Mount and dismount the power tool only when
it is in the transport position (for instructions on
the transport position, also see the operating
instructions of the respective power tool).
Otherwise, the power tool can have such an
unfavourable centre of gravity that it cannot be
held securely.
• When the power tool is mounted to the
attachment set, operate it exclusively on
the saw stand. Without the saw stand, the
attachment set with the power tool does not
stand securely and can tip over.
• Ensure that long and heavy workpieces do not
affect the equilibrium of the saw stand. Long
and/or heavy workpieces must be supported
at the free end.
• Keep your fingers clear of the hinge points
while pushing the saw stand together or
pulling it apart. Danger of fingers being
crushed or contused.
• Observe valid national and international
standards.
5
Publicité
