Publicité
Les langues disponibles
Les langues disponibles
2. PRODUCT INFORMATION
Intended use
This product is designed and intended for
domestic use, for general purpose tool stand use
in home and garden environments and for hobby
purposes. This workbench is not developed
for professional use. The Workbench must be
handled, cared for and maintained in accordance
with these instructions. Any other use is deemed
improper and may result in damage to property or
personal injury.
The universal tool stand is designed for use
with tabletop devices such as mitre saws, scroll
saws, etc. Electric power tools without suitable
mounting holes are not permitted to be fitted to
the universal tool stand and shall not be operated
in conjunction with the universal tool stand.
Electric power tools must be firmly bolted to the
universal tool stand before starting them up.
The universal tool stand is also designed as a
workpiece support when working with mitre
saws, scroll saws, and other similar electric
power tools. The maximum workpiece length is
3m. Additional workpiece supports may have to
be used (e.g. a roller trestle) in order to prevent
longer workpieces tilting. Attention: Ensure that
the workpiece support is secure and not tilted!
Technical specifications
Model No.
Max. permissible load
Opened dimensions
Closed dimensions
Weight
DESCRIPTION
The numbers in the following text refer to the pic-
tures on pages 2-4.
1. Roller
2. Workpiece support
3. Workpiece support knob
4. Extension arm
5. End stop
6
6. Extension arm knob
7. Mitre saw mounting bar
8. Carrying handle
9. Frame
10. Pin slot
11. Spring-loaded pin
12. Leg
13. Foot
14. Mounting bar lever
15. Mitre saw mounting hardware (bolts, washers,
spring washers, nuts)
3. ASSEMBLY
Unfolding The Stand (fig. A)
1. Lay the mitre saw stand on the floor with the
folded legs (12) facing upwards.
2. Depress the spring-loaded pin (11) and unfold
the two upper legs (12) until the spring-loaded
pin (11) clicks into the pin slot (10).
3. Repeat the same procedure for the other two
legs.
4. Lift the stand and flip it into the upright
position.
5. Check that the stand is stable and all of the
leg locking pins have engaged properly.
MSA1030
Folding The Stand
150kg
One pair of legs on the stand must fold firstly for
L: 935-1945mm
the stand to fold flat. The legs have not folded
W: 640mm
into place if the spring-loaded pins (11) do not
H: 825-935mm
pop into place. The legs should not swing about
L: 984mm
when the stand is picked up if the legs have
W: 415mm
locked into position.
H: 224mm
1. Turn the mitre saw stand upside down on the
9.9 kg
floor with the legs (12) sticking up.
2. Depress the spring-loaded pin (11) on the
lower pair of legs and fold them in.
3. Repeat the same procedure on the other pair
of legs.
Attaching The Extension Arms (Fig. B)
1. Slide the extension arm (4) into the frame (9)
until the desired length is reached.
Study each figure and identify the
components required with reference to
the contents table above.
Publicité
