Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
1. Unpack all parts and lay them on a flat, stable surface:
2. Remove all packing materials and shipping devices, if
applicable.
3. The scope of delivery varies depending on the country
and purchased variant:
Model of GTX2-M-0
• Grass trimmer x1
• Instruction manual x1
• Auxiliary handle x1
• Guard x1
4. If you find that parts are missing or show damage do
not use the product but contact your dealer. Using an
incomplete or damaged product represents a hazard to
people and property.
5. Ensure that you have all the accessories and tools
needed for assembly and operation. This also includes
suitable personal protective equipment.
NOTE:
GTX2-M includes the charger and the battery pack.
GTX2-M-0 does not include the charger and the battery
pack.
WARNING:
Wear protective gloves for this assembly work
and always lay the product on a flat and stable
surface while assembling.
Follow the assembly instructions step-by-step
and use the pictures provided as a visual guide
to easily assemble the product!
Do not insert the battery pack before the power
tool is completely assembled or adjusted!
MOUNTING THE AUXILIARY
HANDLE
Keep the auxiliary handle button being pressed, fix the
auxiliary handle to the trimmer (Fig.2).
Release the button until achieve you satisfied position.
Make sure the auxiliary handle is well engaged before next
step.
MOUNTING THE GUARD
WARNING:
To reduce the risk of injury to persons, do not
operate without guards in place.
EN - 12
Align the first arrow on the guard with the arrow on the
trimmer head, put them together.
Rotate the guard clockwise until the second arrow on the
guard matches the arrow on the trimmer head.
Check for the fitting condition between two surfaces (Fig.3).
INSTALLING THE BATTERY PACK
Insert the charged battery to the battery docking port.
Ensure the battery is well seated (Fig.4).
To remove the battery from the machine, press the battery
unlock button and pull the battery out.
NOTE:
Using unsuitable batteries can lead to malfunctions or
damage the machine.
OPERATION
WARNING:
Inspect the tool for complete installation. Any
missing ,damaged or misplace may cause
serious injury.
Wear eye protection, long trousers and stout
shoes at all times while operating the power tool.
SWITCHING ON/OFF
Keep the safety switch being pressed at first. Then press
the switch trigger to switch the product on. Release the
safety switch once the product is running.
Release the switch trigger to switch the product off (Fig.5).
ADUSTING THE LENGTH OF
PIPE
Unlock the telescoping lock clip and stretch the aluminium
pipe to your desired length.
Lock again when finishing your adjustment (Fig.6).
ADUSTING ANGLE OF TRIMMER
HEAD
Keep pressing the angle adjustment button, hold the body
of trimmer and lead it to ideal position. Judge the well
engagement from a sound of "click".
Five optional angles (0~60
requirement (Fig.7).
) set for meeting your using
o
WWW.SENIXTOOLS.COM
Publicité
